Construction Management Fundamentals – Part 4 of 4

The foundation to build your career in construction. Learn about critical project plans and project administration

In Part 4 of 4 in the Construction Management Fundamentals course series, you’ll learn the important project plans which must be in place and utilized.  You’ll also learn the typical tasks required to administer a project.  Specific topics include safety plans, quality plans, site logistics plans, phasing plans, stormwater management plans, document control, submittals, RFI’s, issue management and jobsite records.  This course will set you up for success for the day-to-day requirements on a project.

What you’ll learn

  • Construction management fundamentals.

Course Content

  • Introduction –> 1 lecture • 12min.
  • Project Administration –> 3 lectures • 12min.
  • Document Control –> 2 lectures • 14min.
  • Submittals –> 1 lecture • 9min.
  • Request for Information (RFI) –> 2 lectures • 13min.
  • Issue Management –> 1 lecture • 5min.
  • Jobsite Records –> 1 lecture • 8min.
  • Safety Plans –> 3 lectures • 20min.
  • Quality Plans –> 3 lectures • 20min.
  • Site Logistics Plans –> 2 lectures • 16min.
  • Phasing Plans –> 1 lecture • 6min.
  • Stormwater Management Plans –> 2 lectures • 11min.
  • Conclusion to Part 4 of the Construction Management Fundamentals series –> 1 lecture • 1min.
  • Bonus Material – Introduction to the Project Manager’s Playbook for Construction –> 4 lectures • 13min.

Construction Management Fundamentals - Part 4 of 4

Requirements

  • No prerequisites are required.

In Part 4 of 4 in the Construction Management Fundamentals course series, you’ll learn the important project plans which must be in place and utilized.  You’ll also learn the typical tasks required to administer a project.  Specific topics include safety plans, quality plans, site logistics plans, phasing plans, stormwater management plans, document control, submittals, RFI’s, issue management and jobsite records.  This course will set you up for success for the day-to-day requirements on a project.

Get Tutorial