STM32L4 Bare-Metal Peripheral Drivers Development

No Libraries used, Professional CMSIS Standard, ARM Cortex, ADC,UART,TIMERS, GPIO,SPI,I2C etc.

Welcome to the STM32L4 Bare-Metal Peripheral Drivers Programming course.

What you’ll learn

  • Write firmware using only bare-metal embedded-c.
  • Write Bare-Metal ADC Drivers for the STM32L4 Microcontroller.
  • Write Bare-Metal TIMER Drivers for the STM32L4 Microcontroller.
  • Write Bare-Metal UART Drivers for the STM32L4 Microcontroller.
  • Write Bare-Metal INTERRUPT Drivers for the STM32L4 Microcontroller.
  • Write Bare-Metal GPIO Drivers for the STM32L4 Microcontroller.
  • Write Bare-Metal SPI Drivers for the STM32L4 Microcontroller.
  • Write Bare-Metal I2C Drivers for the STM32L4 Microcontroller.

Course Content

  • Getting Started – Constructing Peripheral Registers from Memory Addresses –> 8 lectures • 1hr 33min.
  • General Purpose Input/Output(GPIO) –> 4 lectures • 43min.
  • Universal Asynchronous Receiver-Transmitter(UART) –> 7 lectures • 1hr 16min.
  • Analog to Digital Conversion (ADC) –> 6 lectures • 58min.
  • The System Tick (SysTick) Timer –> 2 lectures • 23min.
  • General Purpose Timers –> 3 lectures • 38min.
  • Interrupts Programming –> 3 lectures • 46min.
  • Inter-Integrated Circuit (I2C) –> 7 lectures • 1hr 16min.
  • Serial Peripheral Interface (SPI) –> 7 lectures • 1hr 2min.

STM32L4 Bare-Metal Peripheral Drivers Development

Requirements

  • NUCLEO-STM32L476 DEVELOPMENT BOARD.
  • No programming experience needed – I’ll teach you everything you need to know..

Welcome to the STM32L4 Bare-Metal Peripheral Drivers Programming course.

With a programming based approach, this course is designed to give you a solid foundation in bare-metal firmware development for  ARM-based microcontrollers . The goal of this course is to teach you how to navigate the microcontroller reference manual and datasheet to extract the right  information to professionally  build peripheral drivers and firmware. To achieve this goal, no libraries are used in this course, purely bare-metal embedded-c and register manipulations.

Still keeping it simple, this course comes in different ARM Cortex-M development boards  so that students can put the techniques to practice using an ARM Cortex-M development board of their choice. This version of the course uses the STMicroelectronics  STM32L4-NUCLEO which has an ARM Cortex-M4 microcontoller.

By the end of this course you will be able configure microcontroller peripherals  like ADC, UART,PWM, GPIO, TIMER,I2C, SPI, etc.  You will also master the ARM architecture and how to build professional embedded firmware for ARM processors.

Please take a look at the full course curriculum.

REMEMBER : I have no doubt you will love this course. Also it comes with a  FULL money back guarantee for 30 days!  So put simply, you really have nothing to loose and everything to gain.

Sign up and lets start toggling some register bits.

 

—————————————–SOME HIGHLIGHT———————————

Write Bare-Metal ADC Drivers for the STM32L4 Microcontroller

Write Bare-Metal TIMER Drivers for the STM32L4 Microcontroller

Write Bare-Metal UART Drivers for the STM32L4 Microcontroller

Write Bare-Metal INTERRUPT Drivers for the STM32L4 Microcontroller

Write Bare-Metal GPIO Drivers for the STM32L4 Microcontroller

Write Bare-Metal SPI Drivers for the STM32L4 Microcontroller

Write Bare-Metal I2C Drivers for the STM32L4 Microcontroller